RJXHOBBY SP Racing F3 EVO Betaflight Flight Controller for 180 184 195 210 250 280 FPV Racing Drone
- NOTE: The factory default setting is Beatflight, if you need Magnetic and Barometer, please use Cleanfight, please use CLI. Input: 1. set mag_hardware=AUTO 2. Press ENTER 3. save 4. Press ENTER; If you need Barometer, please input: 1. set Baro_hardware=AUTO 2. Press ENTER 3. save 4. Press ENTER
- DO NOT forget to make solder bridges on the back side to set the voltage to the front-top camera connection, and the front-rear video-transmitter.
- Please DO Read the Descriptions and Pictures Manual Carefully to Make Sure You Can Use Our Flight Controller Correctly!
- MicroSD: The SPRacing F3EVO Supports MicroSD/SDHC up to 32GB.
- The Flight Controller is linked by pins, comes with all pins and mounts required.
Brand Name: RJXHOBBY
Mounting holes: 30.5*30.5mm
The SPRacingF3EVO has flight-controller features that makes it the board of choice for any new multi-rotor build.
Broad RC receiver support
Full support for OneShot ESCs for easy PID tuning and a sharper response.
Support 2-6S,when the input voltage is 2-3S , can choose the 12V output via welding spot for battery voltage.
1 x F3 EVO Flight Controller
1 * Connection Accessories
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: