RJXHOBBYF3 EVO Betaflight Flight Controller with F3 Special PDB Power Distribution Board for 180 184 195 210 250 FPV Racing Drone

RJXHOBBYF3 EVO Betaflight Flight Controller with F3 Special PDB Power Distribution Board for 180 184 195 210 250 FPV Racing Drone
ID: RJX1177
UPC : 709466427986
Availability: In Stock
Price: $45.99 $41.39
Qty:     - OR -   Add to Wish List

https://www.youtube.com/watch?v=R3Qe2c4G_tE

http://www.rjxhobby.com/SPRacingF3EVO-Manual-latest.pdf

http://www.rjxhobby.com/SP Racing F3 Evo Flight Controller Guide.pdf

FLAH F3 EVO STEP

https://www.youtube.com/watch?v=52k1PWLpXZM

https://www.youtube.com/watch?v=lc0eZs40siQ

https://www.youtube.com/watch?v=R3Qe2c4G_tE

  • NOTE: The factory default setting is Beatflight, if you need Magnetic and Barometer, please use Cleanfight, please use CLI. Input: 1. set mag_hardware=AUTO 2. Press ENTER 3. save 4. Press ENTER; If you need Barometer, please input: 1. set Baro_hardware=AUTO 2. Press ENTER 3. save 4. Press ENTER
  • DO NOT forget to make solder bridges on the back side to set the voltage to the front-top camera connection, and the front-rear video-transmitter.
  • Please DO Read the Descriptions and Pictures Manual Carefully to Make Sure You Can Use Our Flight Controller Correctly!
  • MicroSD: The SPRacing F3EVO Supports MicroSD/SDHC up to 32GB.
  • The Flight Controller and PDB is linked by pins, comes with all pins and mounts required.

Product description

Specification:

Brand Name: RJXHOBBY

Flight Controller:

Dimension: 36*36mm
Mounting holes: 30.5*30.5mm
Weight: 5.5g
Configurator: Cleanflight+Betaflight+Raceflight+INAV

PDB Power Distribution Board: 

Dimension: 37.5*54.5mm
Mounting holes: 30.5*30.5mm
Weight: 6.6g
Support Voltage: 3-6S
BEC(output voltage): 5V/2A 12V/1.5A
Continuous Current: 4 * 30A
Burst Current: 4 * 35A

Features:

The SPRacingF3EVO has flight-controller features that makes it the board of choice for any new multi-rotor build.
Broad RC receiver support
Programmable LEDs
OneShot ESC
Full support for OneShot ESCs for easy PID tuning and a sharper response.
RJXHOBBY PDB Special board with buzzer on it.
The PDB is linked by pins, comes with all pins and mounts required.
Support 2-6S,when the input voltage is 2-3S , can choose the 12V output via welding spot for battery voltage.
Can be used independently as a power distribution board, compatible with any FPV Multicopter flight control.

Package Included:

1 * PDB Board specially design for F3/F3 EVO
1 x F3 EVO Flight Controller
1 * Connection Accessories

 

 

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: