RJXHOBBY 30.5X30.5mm F7 Flight Controller for FPV Racing Drone 184 190 195 210 220 250 280 300 330
- Please DO Read our Descriptions and Pictures Manual Carefully to Make Sure You Can Use Our F7 Flight Controller Correctly!
- STM32F745VGT6 100lqfp 216MHz MPU6000 SPI.
- The factory default setting is Betaflight, it also supports Cleanflight, Raceflight and INAV.
- All 8 uarts available + VCP, 3-AD inputs, one divided and two direct, CAN-bus ready.
- Supports DSHOT, Oneshot, Specially designed for small multirotors 184 - 350mm.
Brand Name: RJXHOBBY
Mounting Hole: 30.5x30.5mm
Size (mm) L X W X H: 36 x 36 x 3mm
Net Weight: 7.4g ( not including cable)
Gross Weight: 9g
Configurator: The factory default setting is Betaflight, it also supports Cleanflight, Raceflight and INAV.
STM32F745VGT6 100lqfp 216MHz MPU6000 SPI
All 8 uarts available + VCP
External SPI (shared with U4/5)
SD card logging (SPI)
3-AD inputs, one divided and two direct
10 pwm outputs (DSHOT supported six of them) + 6 pwm inputs (1xppm)
1 X RJXHOBBY F7 Flight Controller
1 x Accessories
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: